EN 15534-1塑料合成復合材料混合物及產品性能測試方法--測試標準EN 15534-1 Composites made from cellulose-based materials and thermoplastics（usually called wood-polymer composites(WPC) or natural fibre composites(NFC)） Part 1 Test methods for characterisation of compounds and products
EN 15534-1 纖維基和熱塑性塑料合成復合材料（通常稱為木塑復合材料或天然纖維復合材料） 第1部分：混合物及產品性能測試方法
EN 15534-1塑料合成復合材料混合物及產品性能測試方法--檢測項目及方法
EN 15534-1 Clause 6.1 Appearance(applicable to products) 外觀(適用于產品）
EN ISO 1183-1 method A(material) EN 323(profile) Density 密度
EN 322 Moisture content 含水率
CEN/TS 15676 Pendulum test
EN 13451-1 Annex E Inclination plan test
EN 13893 Dynamic coefficient of friction
EN 15534-1 Clause 6.5 Linear mass (applicable to profiles) 單位長度質量(適用于型材)
EN 15534-1 Clause 6.6.2 Thickness width and length (applicable to profiles, only)厚度，寬度和長度 (只適用于型材)
EN 15534-1 Clause 6.6.3 Deviation from straightness (applicable to profiles)
EN 15534-1 Clause 6.6.4 Cupping
EN ISO 179-1 Method ISO 179-1/1fU Impact resistance(applicable to compounds) 抗沖擊性
EN 15534-1 Clause 7.1.2.1 EN 477 Falling mass impact resistance落錘沖擊
EN 15534-1 Clause 7.1.2.2 Profile cladding
EN ISO 527-2 Tensile properties（applicable to compounds）拉伸性能(只適用于原材料)
EN ISO 178 Flexural properties (applicable to compounds) 彎曲性能
EN 15534-1 Annex A Flexural properties (applicable to non-load bearing products) 彎曲性能
EN 15534-1 Clause 7.4.1 Creep behaviour (Known span in use)
EN 15534-1 Clause 7.4.2 Unknown span in use(未指定實際使用跨距）
EN 15534-1 Clause 7.5 Resistance to indentation 耐壓痕性
EN 13446 Nail and screw withdrawal 握釘力
EN 1383 Pull throuth resistance 鍥入阻力
EN 15534-1 Clause 8.1.1 Resistance to artificial weathering耐人工老化性(室外產品)
EN 15534-1 Clause 8.1.2 Resistance to artificial weathering 耐人工老化性(室內產品)
EN ISO 811-7 Method A or EN 927-3 Resistance to natural ageing耐自然老化性
EN 15534-1 Clause 8.3.1 and EN 317 Swelling and water absorption吸水率和吸水膨脹率
EN 15534-1 Clause 8.3.2 and EN 321 Moisture resistance (cycle conditions) 耐水性(循環條件)
EN 15534-1 Clause 8.3.3 Moisture resistance (boiling test)耐水性(沸水試驗)
EN 15534-1 Clause 8.4 Resistance against termites抗白蟻性
EN 15534-1 Clause 8.5.2 and ENV 12038 Resistance against basidiomycetes耐擔子菌性
EN 15534-1 Clause 8.5.3 and CEN/TS 15083-2 Resistance against soft rotting mico-fugi 耐軟朽木微生菌
ASTM D3273 Resistance against discolouring micro-fugi耐真菌污染
ISO 16869 Resistance against discolouring micro-fugi 耐真菌污染
EN 15458 Resistance against discolouring algae耐藻類污染
EN ISO 9227 Neutral salt spray Resistance to salt spray耐鹽霧性
EN ISO 75-1 and EN ISO 75-2 Method A 1.80MPa Heat deflection temperatur (HDT) 熱變形溫度
ISO 11359-2 -20℃~80℃ Linear thermal expansion線性熱膨脹系數
EN 479 Heat reverison熱恢復性
EN 15534-1 Clause 9.4 Heat build-up 生熱測試
EN ISO 4589-2 Oxygen Index極限氧指數
EN ISO 11925-2 Single flame source test小火源測試
EN 13823 Single buring item test (applicable to cladding only)單體燃燒測試(適用于覆蓋層)
EN ISO 9239-1 Radiant heat source test (floorings)輻射熱源法(鋪地材料)
EN 15534-1 Clause 10.1 and EN ISO 4628-6 Degree of chalking (for coated products, only) 粉化程度
EN ISO 2813 Change of gloss光澤度變化
EN 15534-1 Clause 10.3 Peel strength(applicable to profiles with laminated foil) 剝離強度
獲取更多資訊
